CAST INJECTION TOOLS (Drip Tape - Surface to 6" Depth Injection Tools)

The CAST Injection Tools from Andros enables any grower to inject drip tape in a cost effective and efficient manner. The unique features incorporated into this tool's design ensure that injecting tape will be done accurately and safely. Quality construction and the use of wear resistant materials guarantee the integrity of the injected tape while maintaining a long working life for the tool.

Used in combination with a Series III Carrier or a Universal Reel Carrier, this tool provides a very versatile and adaptable system for shallow injection or surface layout of 5/8" and 7/8" drip tape. It is ideal for use on tool bars pulling planters and bed-shapers that may have a limited amount of space available for mounting additional tools. The swept back tool is designed to minimize soil disturbance allowing the placement of tape close to growing young plants or on freshly planted beds, while the aggressive tip helps pierce tough soils allowing maximum ground penetration. Our chromium-carbide construction assures the highest level of reliability for critical applications. A specially designed plastic guide located in the foot of the tool ensures that tape will lay flat in the bed eliminating problems associated with twisted or kinked tape.

INJECTION TOOLS - CAST Injection Tools 

Note: The following CAST tools require additional components to build a complete system.

1

CAST (AT) Injection Tool

CAST Aggressive Tip (AT) Injection Tool

  • Maximum Injection Depth: 6" (15 cm)
  • Drip Tape Compatibility: 5/8" - 7/8" (16 mm - 22 mm) Diameter

Configurations/Models

  • SI1501-101 - No Standard
  • SI1501-103 - 3/4" x 2 1/2" (1.9 cm x 6.35 cm) Standard
    • Corresponding Guide Roller TG0904-001, Sold Separately
  • SI1501-102 - 1" x 3" (2.54 cm x 7.6 cm) Standard*
    • Corresponding Guide Roller TG0801-001, Sold Separately
  • SI1501-125 - 1" x 3" (2.54 cm x 7.6 cm) 36" Standard
    • Corresponding Guide Roller TG0801-001, Sold Separately
SI1501-101_castAT_180_2

 

2

CAST (SB) Injection Tool

CAST Swept-Back Tip (SB) Injection Tool

  • Maximum Injection Depth: 6" (15 cm)
  • Minimized Soil Disturbance
  • Drip Tape Compatibility: 5/8" - 7/8" (16 mm - 22 mm) Diameter

Configurations/Models

  • SI1501-104 - No Standard
  • SI1501-106 - 3/4" x 2 1/2" (1.9 cm x 6.35 cm) Standard
    • Corresponding Guide Roller TG0904-001, Sold Separately
  • SI1501-105 - 1" x 3" (2.54 cm x 7.6 cm) Standard*
    • Corresponding Guide Roller TG0801-001, Sold Separately
SI1501-101_castSB_series

 

3

CAST Coupler SB Injection Tools

CAST Coupler Swept-Back Tip (SB) Injection Tool

  • Maximum Injection Depth: 6" (15 cm)
  • Minimized Soil Disturbance
  • Compatible With Couplers
  • Drip Tape Compatibility: 5/8" - 7/8" (16 mm - 22 mm) Diameter

Configurations/Models

  • SI1501-121 - No Standard
  • SI1501-123 - 3/4" x 2 1/2" (1.9 cm x 6.35 cm) Standard
    • Corresponding Guide Roller TG1601-002, Sold Separately
  • SI1501-122 - 1" x 3" (2.54 cm x 7.6 cm) Standard*
    • Corresponding Guide Roller TG1601-001, Sold Separately
SI1501-101_castcouplerSB_series

 

4

CAST Break-Away AT Injection Tools

CAST Break-Away Aggressive Tip (AT) Injection Tool Left Hand - For fields with rocks

  • Maximum Injection Depth: 6" (15 cm)
  • Drip Tape Compatibility: 5/8" - 7/8" Diameter (16 mm - 22 mm)
  • Standard: 1" x 3" (2.54 cm x 7.6 cm)
  • Drip Tape Guide Included

Configurations/Models

  • SI1502-002 (LH) - Left Hand, 1" x 3" (2.54 cm x 7.6 cm) Standard
  • SI1502-002 (RH) - Right Hand, 1" x 3" (2.54 cm x 7.6 cm) Standard
SI1502-002_web

 

5

CAST Break-Away (SB) Injection Tool

CAST Break-Away Swept-Back Tip (SB) Injection Tool - For fields with rocks

  • Maximum Injection Depth: 6" (15 cm)
  • Minimized Soil Disturbance
  • Drip Tape Compatibility: 5/8" - 7/8" (16 mm - 22 mm) Diameter
  • Standard: 1" x 3" (2.5 cm x 7.6 cm)
  • Drip Tape Guide Included

Configurations/Models

  • SI1502-001 (LH) - Left Hand, 1" x 3" (2.54 cm x 7.6 cm) Standard
  • SI1502-001 (RH) - Right Hand, 1" x 3" (2.54 cm x 7.6 cm) Standard
SI1502-001_web

*Top choice

SHALLOW INJECTION TOOLS (Drip Tape - Surface to 6" Depth Injection Tools)

The Shallow Injection Tool from Andros enables any grower to inject drip tape in a cost effective and efficient manner. The unique features incorporated into this tool's design insure that injecting tape will be done accurately and safely. Quality construction and the use of wear resistant materials guarantee the integrity of the injected drip tape while maintaining a long working life for the tool.

A specially designed plastic guide located in the foot of the tool ensures that tape will lay flat in the bed eliminating problems associated with twisted or kinked tape. Large clearances inside the tool body allow for passage of mechanical couplers. An ever-growing network of Andros dealers insure that parts and service are available to the customer.

6

SHALLOW Injection Injection Tool

SHALLOW Swept-Back Tip (SB) Injection Tool

  • Maximum Injection Depth: 6" (15 cm)
  • Minimized Soil Disturbance
  • Drip Tape Compatibility: 5/8" - 7/8" (16 mm - 22 mm) Diameter
  • Standard: 5/8" x 2" (2.5 cm x 7.6 cm)

Configurations/Models

  • SI0802-103 - No Standard
  • SI0704-001- 5/8" x 2" (1.59 cm x 5.08 cm) Standard
    • Compatible with drip tape roller guide TG0802-001 (sold separately)
shallowtools_180b

 

Injection Tool Components and Replacement Parts

7

Clamps

Clamps to attach injection tools to implement bar.

Configurations/Models

  • 22513 Clamp - Compatible with 2 x 2 bar (diamond bar) and 1' x 3"  Injection Tool Standard (Part Number: 1298)
  • 4413 Clamp -  Compatible with 4 x 4 bar and 1' x 3"  Injection Tool Standard (Part Number: 1299)
  • 4613 Clamp -  Compatible with 4 x 6 bar and 1' x 3"  Injection Tool Standard (Part Number: 3137)
  • 5313 Clamp -  Compatible with 5 x 3 bar and 1' x 3"  Injection Tool Standard (Part Number: 950-C530)
  • 5513 Clamp -  Compatible with 5 x 5 bar and 1' x 3"  Injection Tool Standard (Part Number: 3052)

 

8

Ground-Following Units

The Ground-Following Unit provides added accuracy to drip tape installations. The units work with CAST tools.

  • Compatible with CAST Injection Tools

Configurations/Models

  • SI1902-099 - Ground-Following Unit
  • SI1902-099 Deluxe - Ground-Following Unit with Finishing kit.
SI1902-099_web